B-MAX 2012 – Engine – 1.0L EcoBoost (74kW/100PS)/1.0L EcoBoost (90kW/120PS)/1.0L EcoBoost (103kW/140PS) (YY) – Crankshaft Rear Seal – Removal and Installation

Engine - 1.0L EcoBoost (74kW/100PS)/1.0L EcoBoost (90kW/120PS)/1.0L EcoBoost (103kW/140PS) (YY) - Crankshaft Rear SealB-MAX 2012.75 (01/2012-)
Removal and Installation

Special Tool(s)

Click to resize E141993

303-1602
Locking Tool, Crankshaft

Removal

  1. Refer to: Jacking and Lifting (100-02 Jacking and Lifting, Description and Operation).

Click to resize E226681

5-Speed Manual Transmission - B5/IB5
  1. Remove the following items:
6-Speed Manual Transmission - B6
  1. Remove the following items:
  1.  
    1. Install Special Service Tool: 303-1602.

    1. NOTE: Discard the bolts.

Click to resize E144426

Click to resize E221238

Installation

  1. NOTE: Make sure that the mating faces are clean and free of foreign material.

    NOTE: New crankshaft rear seal carriers are supplied with an alignment sleeve which must be removed after installation.

    NOTE: Install all the bolts finger tight before final tightening.

    Torque: 10 Nm

Click to resize E146868

  1.  

    1. NOTE: Make sure that new bolts are installed.

      Torque:
      1-6 
      Stage 1:
      10 Nm
      Stage 2:
      25 Nm
      Stage 3:
      50 Nm
      Stage 4:
      90°
    1. Remove Special Service Tool: 303-1602.

Click to resize E225249

5-Speed Manual Transmission - B5/IB5
  1. Refer to: Clutch Disc and Pressure Plate (308-01 Clutch - 5-Speed Manual Transmission – B5/IB5, Removal and Installation).
6-Speed Manual Transmission - B6
  1. Refer to: Clutch Disc and Pressure Plate (308-01 Clutch - 5-Speed Manual Transmission – B5/IB5, Removal and Installation).
  1. Remove the following items:
    • Refer to: Oil Pan (303-01A Engine - 1.0L EcoBoost (74kW/100PS)/1.0L EcoBoost (90kW/120PS)/1.0L EcoBoost (103kW/140PS) (YY), Removal and Installation).
  1. Install the following items:
    • Refer to: Oil Pan (303-01A Engine - 1.0L EcoBoost (74kW/100PS)/1.0L EcoBoost (90kW/120PS)/1.0L EcoBoost (103kW/140PS) (YY), Removal and Installation).

  1. NOTE: Use the Powertrain Control Module (PCM) Misfire Monitor Profile Correction routine in the diagnostic scan tool.

Leave a Reply

Your email address will not be published. Required fields are marked *