B-MAX 2012 – Climate Control System – General Information – Specifications – Lubricants, Fluids, Sealers and Adhesives

Climate Control System - General Information - SpecificationsB-MAX 2012.75 (01/2012-)

Lubricants, Fluids, Sealers and Adhesives

Specifications
Refrigerant R134a (vehicles up to 16.08.2016)WSH-M17B19-A
Refrigerant R1234yf (vehicles from 16.08.2016)WSS-M17B21-A
Refrigerant oil (vehicles up to 16.08.2016)WSH-M1C231-B
Refrigerant oil (vehicles from 16.08.2016)WSS-M2C300-A2

Refrigerant Capacities (When Charging)

Vehicles with 1.0L EcoBoost engineGrams
Air Conditioning600 ± 10

Refrigerant Capacities (When Charging)

Vehicles with 1.4L Duratec-16V (Sigma) and 1.6L Duratec-16V Ti-VCT (Sigma) engineGrams
Air Conditioning650 ± 10

Refrigerant Capacities (When Charging)

Vehicles with 1.5L Duratorq-TDCI (DV) diesel engineGrams
Air Conditioning550 ± 10

Refrigerant Capacities (When Charging)

Vehicles with 1.6L Duratorq-TDCI (DV) diesel engineGrams
Air Conditioning600 ± 10

Refrigerant Oil Capacities (When Charging)

Milliliters
Air Conditioning120

Addition of Refrigerant Oil (When a new compressor is installed)

Milliliters
Air conditioning compressor if the amount of refrigerant oil taken from the faulty compressor is 50 to 90 mlDrain 50 from new compressor.
Air conditioning compressor if the amount of refrigerant oil taken from the faulty compressor is 91 to 120 mlDrain 20 from new compressor.
Air conditioning compressor if the amount of refrigerant oil taken from the faulty compressor is more than 120 mlDrain 0 from new compressor.

Addition of Refrigerant Oil (When new components are installed)

Milliliters
Condenseradd 30.
Evaporatoradd 30.
Receiver Drier add 30.
Every time refrigerant is evacuated.as taken from the system
When all new components are installed (including compressor).add 0.
When A/C system is flushed.120

Clutch air gap

mm
Compressor clutch air gap0,35 - 0,85

Torque Specifications

ItemNmlb-ftlb-in
Compressor drive plate retaining bolt1310

Leave a Reply

Your email address will not be published. Required fields are marked *