B-MAX 2012 – Engine – 1.4L Duratec-16V (66kW/90PS) – Oil Pan – Removal and Installation Engine - 1.4L Duratec-16V (66kW/90PS) - Oil PanB-MAX 2012.75 (01/2012-)Removal and InstallationSpecial Tool(s) / General Equipment205-047Slide Hammer303-633Adapter for 205-047Plastic ScraperMaterialsNameSpecification????? H-BWCU7J-BNDRT-AA-RTV Silicone SealantWSE-M4G323-A6RemovalRefer to: Jacking and Lifting (100-02 Jacking and Lifting, Description and Operation).NOTE: Be prepared to collect escaping fluid.NOTE: The oil drain plug with O-ring seal is to be reused unless damaged. Use Special Service Tools: 205-047, 303-633. InstallationNOTE: Make sure that the mating faces are clean and free of foreign material.Use the General Equipment: Plastic ScraperMaterial: - (????? H-BW / CU7J-BNDRT-AA) Install the following items: 2x M8x20 studs NOTE: The component must be installed within 10 minutes of applying the sealant.Complete this step within: 10minMaterial: WSE-M4G323-A6 (RTV Silicone Sealant) Remove the following items: 2x M8x20 studs NOTE: Install all the bolts finger tight before final tightening.Torque: Bolts 1-4 48 NmBolts 5-17 19 NmTorque: 28 NmTorque: 4 NmNOTICE: Make sure that the engine oil is to specification. Make sure that fluid level is to the MAX mark.Refer to: Specifications (303-01C Engine - 1.4L Duratec-16V Flex Fuel (71kW/96PS) – Sigma, Liquefied Petroleum Gas (LPG), Specifications).
Complete this step within: 10min
Make sure that the engine oil is to specification.