|
|
Removal and Installation General Equipment Removal - Remove the following items:
Refer to: Crankshaft Front Seal (303-01D Engine - 1.6L Duratec-16V Ti-VCT (77kW/105PS) – Sigma, Removal and Installation).
|
NOTE: Only tighten the bolts finger tight at this stage.
|
NOTE: Only tighten the nuts and bolts finger tight at this stage.
|
- Remove the following items:
|
- Remove the following items:
Refer to: Oil Pan (303-01D Engine - 1.6L Duratec-16V Ti-VCT (77kW/105PS) – Sigma, Removal and Installation).
|
NOTE: The O-ring seal is to be reused unless damaged.
|
NOTE: Note the different lengths of the bolts.
|
Installation NOTE: Install all the bolts finger tight before final tightening. NOTE: Note the different lengths of the bolts.
|
- Install the following items:
Refer to: Oil Pan (303-01D Engine - 1.6L Duratec-16V Ti-VCT (77kW/105PS) – Sigma, Removal and Installation).
|
 NOTICE: Use a wooden block to protect the oil pan when supporting the engine.
|
Refer to: Crankshaft Front Seal (303-01D Engine - 1.6L Duratec-16V Ti-VCT (77kW/105PS) – Sigma, Removal and Installation).
|
|
|
