B-MAX 2012 – Fuel System – General Information – 1.4L Duratec-16V Flex Fuel (71kW/96PS) Sigma, Liquefied Petroleum Gas (LPG) – Gas Fuel System Leak Test Using Electronic Leak Detector – General Procedures

Fuel System - General Information - 1.4L Duratec-16V Flex Fuel (71kW/96PS) – Sigma, Liquefied Petroleum Gas (LPG) - Gas Fuel System Leak Test Using Electronic Leak Detector

B-MAX 2012.75 (01/2012-)

General Procedures

General Equipment

Electronic Leak Detector

Leak detection

Refer to: Liquefied Petroleum Gas (LPG) and Compressed Natural Gas (CNG) Fuel Systems Health and Safety Precautions (100-00 General Information, Description and Operation).

WARNING: If a leak is detected, seal the leak immediately to prevent more gas escaping into the service area. Retest the entire system for leaks. Failure to follow this instruction may result in the release of a large amount of explosive gas, which could cause personal injury or death in a fire or explosion.

Check that the fuel level is at a minimum of half full. Top up if necessary.

1. Start and run the engine at idle.
1. Switch to gas fuel operating mode.
1. NOTE: The engine is operating on liquefied petroleum gas (LPG) when the light emitting diode (LED) is illuminating green.